Suitable materials
Hardness increases significantly without having a negative impact on corrosion resistance.
See also brochures and certificates
Stainihard® NC is developed to be applied to austenitic and duplex stainless steels. In certain cases it is also possible to treat other materials (Ni-Based alloys and PH steel grades).
The possibilities of applying Stainihard® to your products can be discussed with one of our specialists.
Examples of proven materials are:
AISI: 301, 302, 302HQ, 303, 304, 304L, 314, 314L, 316, 316L, 316LN, 316LVM, 316S, 316Ti, 317L, 318LN, 321.
DIN-Number: 1.4301, 1.4305, 1.4306, 1.4307, 1.4310, 1.4319, 1.4401, 1.4404, 1.4408 1.4429, 1.4435, 1.4438, 1.4441, 1.4462, 1.4541, 1.4547, 1.4550, 1.4567, 1.4571. 1.4841
EN 10088 number: X10CrNi 18 8 – X12CrNi 18 8 – X3CrNiCu 18 9 – X10CrNiS 18 8 – X5CrNi 18 10 – X2CrNi 18 9 – X2CrNi 19 11 – X6CrNiTi 18 10 X5CrNiMo 17 12 2 – X6CrNiMoTi 17 12 2 – X2CrNiMo 17 13 2 – X2CrNiMoN 17 13 3 – X2CrNiMo 18 14 3 – X2CrNiMo 18 15 3 – X3CrNiMo 18 16 4 – X1CrNiMoCuN 20 18 7 – X2CrNiMoN22-5-3 – X15CrNiSi25-20.
Our specialists will be happy to advise you on all the possibilities of Stainihard® NC.
If you are looking for a solution for non- or low alloy steels, please refer to: www.nitrotec.eu
